Suit ironing steps
- Jun 08, 2018 -

1, first from the predecessor, the longitudinal direction, the edge of the clothing will be flat.
2. The sleeves are ironed back and forth from the cuffs to the shoulders.
3, hot shoulders, with a good roll of towel pads on the shoulders to iron, you can iron three-dimensional.
4. Use the corner of the ironing board to iron the clothes and operate from shoulder to back in such a direction.
5, in the hot predecessor, with the horizontal side of the iron, hot from top to bottom.
6, fold the collar, should be based on the top 1/3 of the trademark shall prevail.
7. Skirts with skirts are folded. Use pins to make them better, and then iron them.
8, first spray with a spray of water vapor, let the float float to the surface.
9, then use a small brush to clean.
10, spray some water again, the amount of water is about 3 times the first time.
11, finally use a clean towel to suck away the water, the stolen goods will also fall off, do not use the way of rubbing.

Remark:

.

SUBMIT

.